|
CHEMICAL VS BATTERY
COMPARISON |
CHEMICAL |
BATTERY |
HEAT TIME: |
1 hour |
2 hours |
RECHARGE METHOD: |
Boil for 10-15 minutes |
Plug in charger approx 3hours |
NUMBER OF USES: |
Up to 500 times |
Up to 500 times |
TECHNOLOGY: |
Basic Heating System |
Advanced Heating System |
WEIGHT WHEN WEARING: |
450 grams |
375 grams |
COST: |
$89 |
$289 |
CHEMICAL VERSION HEATERS
Click here for video demonstration
TO ACTIVATE:
1) Firmly press and release “Activator Button”.
2) Solution will then crystallize and generate heat.
3) Massage the pack until soft.
TO RECHARGE:
1) Place heater in protective pouch (supplied).
2) Boil in water for 15 minutes until contents completely melted.
3) Allow pack to cool before “Re-Activation”.
WARNING:
Some skin types more sensitive than others.
Always perform short test before prolonged use.
Never allow heat pack direct contact with skin.
Do not microwave.
Ship heat packs in solid not liquid state.
CONTENTS:
Non-Toxic
Sodium Acetate (Food Grade) and Water.
Batteries
|
The batteries we have developed are a very low voltage extremely safe lithium polymer rechargeable battery similar to those found in mobile phones.
Low Voltage: 7.4V, Amps: 2.2Amps
Size: 100x70x12mm
Weight: 150grams
|
Heaters
|
The heaters are a low wattage wafer thin flexible heating element that replace lost heat via the kidney region.
|
Connectors
|
The connectors are suitable for all watersports to the depth of 1 meter
(not suitable for scuba diving)
|
Charger
|
The charger is suitable for use in all countries.
It has a built in safety feature to prevent short circuit and overcharging.
|
Universal Adaptor
 |
This clever universal adaptor will allow you to plug in the charger to charge in most countries including USA, Europe, UK, Australia it comes free if the charger plug is not suitable in your country.
|
HOME
|
